作业帮请帮忙翻译一下,意思要大概准确,谢谢.ash
来源：学生作业帮 编辑：作业帮 分类：综合作业 时间：2024/05/12 19:41:23
请帮忙翻译一下,意思要大概准确,谢谢.ash
关于AB 型号上的thermostat 改成160度并要求非正常工作状态下整机断电,我们工程师经过查看电路图发现如果这样做的话,机器就不会实现No-Load protect.据说当时工程师研发出这款平台的时候,就是特别针对市场出现这种空载投诉才设计的.因为convention 的温度很高,如果没有这种保护,一旦炉子出现非正常情况,the cavity就可能会引起breaks, melting, ignition, discoloration, deformation, in particular the magnetron will be damage due to temperature is high.
所以这就是为什么,我们的convention machine 没有设计整机断电的原因
关于AB 型号上的thermostat 改成160度并要求非正常工作状态下整机断电,我们工程师经过查看电路图发现如果这样做的话,机器就不会实现No-Load protect.据说当时工程师研发出这款平台的时候,就是特别针对市场出现这种空载投诉才设计的.因为convention 的温度很高,如果没有这种保护,一旦炉子出现非正常情况,the cavity就可能会引起breaks, melting, ignition, discoloration, deformation, in particular the magnetron will be damage due to temperature is high.
所以这就是为什么,我们的convention machine 没有设计整机断电的原因
About AB Model 160 degrees on the thermostat changed and requires non-normal operating conditions the machine off,our engineers through View Circuit found that if this is done,the machine will not achieve the No-Load protect.It was reported that engineers developed this platform,it is especially for markets such complaints before the design load.Because the convention's temperature is high,if there is no such protection,once the stove appear abnormal situations,the cavity may cause breaks,melting,ignition,discoloration,deformation,in particular the magnetron will be damage due to temperature is high.
So that's why,our convention machine is not designed to cause the machine off
So that's why,our convention machine is not designed to cause the machine off