作业帮感激不尽!麻烦英语好的朋友帮忙翻译一下哦!
来源：学生作业帮 编辑：作业帮 分类：英语作业 时间：2024/05/09 15:49:52
感激不尽!麻烦英语好的朋友帮忙翻译一下哦!
PRE-PRODUCTION
PRODUCTION PLANNING AND CONTROL: 0 Mark ( X ) if not applicable
Does factory have a Daily Production Report?
Does factory have a Weekly Production Planning Status Report to identify which orders are in-process / completed against delivery dates?
Does factory conduct a formal pre-production meeting for every new style before production start? Yes 0 No 0
MACHINERY: 0 Mark ( X ) if not applicable
Type of machines are suitable for manufacturing required type of product.
Number of machines for each operation is sufficient for producing stated production capacity.
Do you observe that machines look like they are cleaned morning and night minimum, and free of excess oil?
Are machines covered at night, or when not in use?
Does the factory have an in-house machinery maintenance plan?
Does the factory have a machinery maintenance card on each machine, or do they keep a breakdown log?
Machine list attached
Please list specialized/computerized production equipment.
WAREHOUSE: 0 Mark ( X ) if not applicable
Describe storage conditions: Piece goods:
Accessories / Trims:
Fabric storage is organized and fabrics are stored off the floors and remain in protective wrap or box until opened for use
Trims and accessories are stored properly and inventory record maintained
Factory has a logical system for incoming Materials /Accessories / WIP
FABRIC & ACCESSORIES: 0 Mark ( X ) if not applicable
Does factory have a fabric inspection machine?
Fabrics are inspected randomly using the 4 or 10 point system or any other system
(Must be proven by current records reflecting the number of defects, type of defects and frequency)
Inspection records properly show the defect identified and result of inspection
Does factory establish a wash blanket development procedures for washed / dyed garment?
Comments on Pre-production:
PRE-PRODUCTION
SPREADING AND CUTTING: 0 Mark ( X ) if not applicable
Where is the cutting? 0 Same site as production. 0 Other, please state:
How many cutting tables:
Automatic spreading equipment
Fabric is stored by shade lots to spreading operation
Proper cutting methods and equipment are used according to type of fabric & design
Spreading and Cutting machines are properly maintained (including oiling/sharpening/cleaning)
Fabric cut piles are marked numbered properly.
Cut parts are inspected so that defective or shaded parts are subject to replacement.
Procedures are in place to allow sufficient time for knitted fabric to relax before and after spreading
Spreading tables and bundle tables are generally clean and free of sharp edges
PRE-PRODUCTION
PRODUCTION PLANNING AND CONTROL: 0 Mark ( X ) if not applicable
Does factory have a Daily Production Report?
Does factory have a Weekly Production Planning Status Report to identify which orders are in-process / completed against delivery dates?
Does factory conduct a formal pre-production meeting for every new style before production start? Yes 0 No 0
MACHINERY: 0 Mark ( X ) if not applicable
Type of machines are suitable for manufacturing required type of product.
Number of machines for each operation is sufficient for producing stated production capacity.
Do you observe that machines look like they are cleaned morning and night minimum, and free of excess oil?
Are machines covered at night, or when not in use?
Does the factory have an in-house machinery maintenance plan?
Does the factory have a machinery maintenance card on each machine, or do they keep a breakdown log?
Machine list attached
Please list specialized/computerized production equipment.
WAREHOUSE: 0 Mark ( X ) if not applicable
Describe storage conditions: Piece goods:
Accessories / Trims:
Fabric storage is organized and fabrics are stored off the floors and remain in protective wrap or box until opened for use
Trims and accessories are stored properly and inventory record maintained
Factory has a logical system for incoming Materials /Accessories / WIP
FABRIC & ACCESSORIES: 0 Mark ( X ) if not applicable
Does factory have a fabric inspection machine?
Fabrics are inspected randomly using the 4 or 10 point system or any other system
(Must be proven by current records reflecting the number of defects, type of defects and frequency)
Inspection records properly show the defect identified and result of inspection
Does factory establish a wash blanket development procedures for washed / dyed garment?
Comments on Pre-production:
PRE-PRODUCTION
SPREADING AND CUTTING: 0 Mark ( X ) if not applicable
Where is the cutting? 0 Same site as production. 0 Other, please state:
How many cutting tables:
Automatic spreading equipment
Fabric is stored by shade lots to spreading operation
Proper cutting methods and equipment are used according to type of fabric & design
Spreading and Cutting machines are properly maintained (including oiling/sharpening/cleaning)
Fabric cut piles are marked numbered properly.
Cut parts are inspected so that defective or shaded parts are subject to replacement.
Procedures are in place to allow sufficient time for knitted fabric to relax before and after spreading
Spreading tables and bundle tables are generally clean and free of sharp edges
产前
生产计划和控制:0马克(X)如不适用
工厂是否有一个日常生产报告吗?
工厂是否有一个周生产计划状态报告确认哪些订单完成过程对交货日期吗?
工厂是否进行正式的产前会议之前,为每一个新的风格开始拍摄?是的没有0
机械:0马克(X)如不适用
类型的机器是适合生产要求的类型产品的.
对每个操作数量的机器生产说够了生产能力.
你观察到机器看起来像清洗每日早上及晚上最小,并且没有多余的油脂吗?
机器是覆盖在夜间工作之后,或是在不使用时?
工厂是否有内部的机械维护计划?
工厂是否有一个机械维修卡在每台机器上,或他们保持故障木头?
名单附机
请列出专业/电脑生产设备.
仓库:0马克(X)如不适用
描述储存条件:布匹:
附件/辅料:
织物组织和织物存储储存了地板和保持保护性包装或盒子直到开放使用
辅料和配件库存记录储存和适当维护
工厂有逻辑系统的进料/附件/纪录
织物及配件:0马克(X)如不适用
工厂是否有面料检验的机器吗?
面料检验使用4或随机10分的系统或任何其他系统
(必须是反映当前记录证明的缺陷数、类型存在的缺陷以及频率)
检验记录正确识别和结果显示缺陷的检验
工厂是否建立一个洗毛毯发展程序/染洗衣服吗?
生产计划和控制:0马克(X)如不适用
工厂是否有一个日常生产报告吗?
工厂是否有一个周生产计划状态报告确认哪些订单完成过程对交货日期吗?
工厂是否进行正式的产前会议之前,为每一个新的风格开始拍摄?是的没有0
机械:0马克(X)如不适用
类型的机器是适合生产要求的类型产品的.
对每个操作数量的机器生产说够了生产能力.
你观察到机器看起来像清洗每日早上及晚上最小,并且没有多余的油脂吗?
机器是覆盖在夜间工作之后,或是在不使用时?
工厂是否有内部的机械维护计划?
工厂是否有一个机械维修卡在每台机器上,或他们保持故障木头?
名单附机
请列出专业/电脑生产设备.
仓库:0马克(X)如不适用
描述储存条件:布匹:
附件/辅料:
织物组织和织物存储储存了地板和保持保护性包装或盒子直到开放使用
辅料和配件库存记录储存和适当维护
工厂有逻辑系统的进料/附件/纪录
织物及配件:0马克(X)如不适用
工厂是否有面料检验的机器吗?
面料检验使用4或随机10分的系统或任何其他系统
(必须是反映当前记录证明的缺陷数、类型存在的缺陷以及频率)
检验记录正确识别和结果显示缺陷的检验
工厂是否建立一个洗毛毯发展程序/染洗衣服吗?