英语翻译制做工艺;1先在模板上涂上乳化脱模油 2铺上浆料铺匀3然后铺中间一层料4再铺上砂光料制做好板片后进行一次烘干养护
来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/05/17 23:27:38
英语翻译
制做工艺;1先在模板上涂上乳化脱模油 2铺上浆料铺匀3然后铺中间一层料4再铺上砂光料
制做好板片后进行一次烘干养护第二天拆模再进行二次烘干养护第三天自然养护第四天锯边;下一步后砂光;背面打磨两遍正面打磨一遍;最后品检包装出厂
制做工艺;1先在模板上涂上乳化脱模油 2铺上浆料铺匀3然后铺中间一层料4再铺上砂光料
制做好板片后进行一次烘干养护第二天拆模再进行二次烘干养护第三天自然养护第四天锯边;下一步后砂光;背面打磨两遍正面打磨一遍;最后品检包装出厂
Process flow chart
step 1:Coat the emulsificaiton molding release on the template.
step 2:Spread sizing aent with well-distributed.
step 3:Fill the required middle mateial then.
step 4:Put the sanding staffs finally.
step 5:1st time bake and curing.
step 6:Unload on the next day.
step 7:2nd time bake and curing.
Step 8:Air cure the third day.
Step 9:Trim on the forth day.
Step 10:Polishing.
step 11:Polish back two times and face one time.
Step 12:Packing and final QC.
step 1:Coat the emulsificaiton molding release on the template.
step 2:Spread sizing aent with well-distributed.
step 3:Fill the required middle mateial then.
step 4:Put the sanding staffs finally.
step 5:1st time bake and curing.
step 6:Unload on the next day.
step 7:2nd time bake and curing.
Step 8:Air cure the third day.
Step 9:Trim on the forth day.
Step 10:Polishing.
step 11:Polish back two times and face one time.
Step 12:Packing and final QC.
英语翻译制做工艺;1先在模板上涂上乳化脱模油 2铺上浆料铺匀3然后铺中间一层料4再铺上砂光料制做好板片后进行一次烘干养护
乳化油如何制做
玻璃上的画那个可以在玻璃 上做画是怎么做的,那位给介绍一下制做的工艺,
生日蛋糕上的奶油是怎么制做的
如何将FLASH制做的动画发的51上?
你好 由于市场上劣质的(过氧化甲乙酮)很多,想自己制作, 请教您(过氧化甲乙酮)的配方和具体的制做工艺
※请问制作与制做有何意思上的差别?
谁知道3D空间怎样制做
中文译英语!肉松三明治鸡蛋煮熟切片.牛角面包在烤面包机中略烤一下后横切两半.每片面包先涂一层沙拉,然后铺上一层肉松,最后
一根绳子的两端分别涂上红色和白色,再在中间画上3个圆点,涂上白色...
用纸怎样制做圆锥体
怎样制做flash课件