英语翻译请各位朋友帮忙翻译以下内容,特急,CONSTRUCTIONMobilon – lower edge of wai

英语翻译
请各位朋友帮忙翻译以下内容,特急,
CONSTRUCTION
Mobilon – lower edge of waist basque to below measurements.
Hanger tape – insert in inner waist side seams as notched – see below cut measurements.
Crotch seam – please double stitch to ensure strength.
Waist band darts – stitch from 0cms at edge notches – 1.2cms either side of waist drill – back to 0cms at other side notch.
Waist elastic – cut to template provided and insert in fold edge of waistband – catch into side seams.
Front and Back leg seams to be narrow gauge 2NC topstitched – turn seam towsrds “side seam”.
Waist onto pant – 1cm and 4OL seam onto pant – stretch waist slightly to fit to pant.Tum seam down and narrow 2NC.
Pocket darts – stitch from edge notches to 1cm past end drills.
Pocket Top edge – turn in 1cm then 4cm and SN.
Pocket attachment – 3OL around pocket – turn under 1cm and plainsew to front legs – place top comer 6mms up and out from marks.

先预留个位置!为分而来 ,2楼翻译得很牛,hit your lung
好了我来补上望采纳!
CONSTRUCTION（就是做工要求/工艺说明的意思）
Mobilon – lower edge of waist basque to below measurements.
翻译为：低腰巴斯克衫/下装,尺寸度法如下!（这个句子估计是你单独贴这里来翻译的跟下面的这个没关系,你要按照你原始资料那里的如下资料度法）
Hanger tape – insert in inner waist side seams as notched – see below cut measurements.
衣架绳/织带,内置入外侧骨腰位处,跟标记的位置,绳/织带按如下尺寸剪.
Crotch seam – please double stitch to ensure strength.
裤裆骨位-请用双针线迹更加牢固.
Waist band darts – stitch from 0cms at edge notches – 1.2cms either
腰头省位-从腰头零线位开始车到边角点位处长度是1.2CM每个.
side of waist drill – back to 0cms at other side notch.
腰头外侧（drill=twill）-意思就是后幅斜条打摺的外侧到腰头零线位.
Waist elastic – cut to template provided and insert in fold edge of
waistband – catch into side seams.
腰头象筋-根据提供的实样剪,然后折入腰头里面在外侧骨的地方接头,意思就是前后分2段,2段接头在外侧骨缝
Front and Back leg seams to be narrow gauge 2NC topstitched – turn seam towsrds “side seam”.
裤腿前后幅骨位小边双针面线要朝向外侧骨位!
Waist onto pant – 1cm and 4OL seam onto pant – stretch waist slightly to fit to pant.Tum seam down and narrow 2NC.
裤子的腰头-裤子子口是1CM和2.5CM.腰头要轻微固定一下那样显得更合体!
中空骨位倒下要车小边双针
Pocket darts – stitch from edge notches to 1cm past end drills.
口袋省位-点位边开始车过1CM到斜条头部.
Pocket Top edge – turn in 1cm then 4cm and SN.
口袋顶边-反折进1CM,然后是4CM最后压面线.
Pocket attachment – 3OL around pocket – turn under 1cm and plainsew to front legs – place top comer 6mms up and out from marks.
口袋其他要点--口袋四周车7/8英寸宽的面线--里边折1CM平着车入前裤腿上--面置于起上原标注的位置外上6CM处