谁能把这个翻译成英文下面是我写毕业论文的摘要,要翻译成英文,但用在线翻译和有道翻译的不能用,本人英语菜到家 谁能给翻译下

谁能把这个翻译成英文
下面是我写毕业论文的摘要,要翻译成英文,但用在线翻译和有道翻译的不能用,本人英语菜到家 谁能给翻译下 万分感谢

摘要
锌是人类需求量最大的有色金属之一,广泛用于航天、汽车、船舶、钢铁、机械、建筑、电子及日用工业等行业.目前,全球80%的锌是用湿法生产的,并且湿法炼锌所占比重越来越高.但是,随着锌资源的逐渐减少以及其成分的复杂化,加上越来越多地使用二次资源,炼锌原料含氯越来越高,导致锌电解液含氯量越来越高,而锌电解液氯含量过高会造成阴、阳极板消耗加快,电耗上升,对系统设备产生严重腐蚀,增加生产成本,降低电锌质量等
针对锌电解液含氯过高问题,很大一部分企业采用铜渣除氯法脱出锌浸出液中的氯,脱除效果显著,但随之而来的问题是产生了大量的氯化亚铜渣,如何高效、清洁地将氯化亚铜渣进行综合利用却又是非常棘手的问题.本论文拟用微波选择性脱除氯化亚铜渣中的氯,得到氧化铜产品.主要开展了以下几方面研究.
（1）对氯化亚铜渣原料进行分析检测.结果显示该物料主要物相为Cucl、CuO、ZnS.
（2）考察了氯化亚铜渣在微波场中的升温特性,发现氯化亚铜渣吸波特性较好,在微波加热条件下能迅速升温,升温曲线近似一S型曲线.
（3）考察了微波焙烧温度对脱氯效果的影响.发现450℃时脱氯效果最佳.
（4）考察了时间对微波脱氯效果的影响.发现焙烧保温4个小时可以使脱氯较为完全.
（5）考察了氧气流量对微波脱氯效果的影响.发现150g物料的情况下,氧流量为10L/h时,脱氯达到理想效果.

The zinc is human demand is one of the largest non-ferrous metal, widely used in aerospace, automobile, shipbuilding, steel, machinery, construction, electronics and consumer industries.At present, the world's 80 7 � � � zinc is produced with wet method, and wet zinc smelting proportion is higher and higher.But with the gradually reduce of zinc resources and its composition is complicated, with more and more use of secondary resources, zinc smelting raw material chlorine is more and more high, cause the zinc electrolyte chlorine content is higher and higher, but the content of zinc chloride electrolyte is too high will cause Yin and anode consumption, power consumption is rising, serious corrosion of system equipment, increase production costs, reduce electric zinc for zinc electrolyte high chlorine problem such as quality, a large part of the enterprise using the copper slag dechlorination method from zinc leach liquor of chlorine, removal effect is remarkable, but the trouble with this is to produce a large number of cuprous chloride slag, high efficient, clean, how to comprehensive utilization of sludge and cuprous chloride is very thorny problem.This paper employs the microwave selective removal of cuprous chloride slag chloride, copper oxide product.The main research was carried out by the following aspects.(1) analysis of cuprous chloride slag raw material inspection.The results showed that the main phase of Cucl, CuO, ZnS. Administered(2) examines the cuprous chloride slag temperature characteristics in microwave field, found that the cuprous chloride slag is potter, absorption under the condition of microwave heating can quickly heat up, temperature curve approximation a s-shaped curve.(3) is investigated, and the effects of microwave roasting temperature on dechlorination.Found 450 ℃ when the dechlorination effect is best.(4) looked at the time of microwave dechlorination effect.Found roasting insulation 4 hours can make the dechlorination more completely.(5) surveyed the oxygen flow rate on the influence on the effect of microwave dechlorination.Found 150 g material, oxygen flow rate of 10 l/h, the dechlorination achieve the ideal effect.
再问： 这个不能过啊 要人工翻译的