作业帮高分急求 在线等 如何用matlab 画4条直线 并且给这4条直线命名.
来源：学生作业帮 编辑：作业帮 分类：综合作业 时间：2024/05/13 06:00:02
高分急求 在线等 如何用matlab 画4条直线 并且给这4条直线命名.
t=[0,2,4,6,8];
y1=[0,0.075,0.135,0.1875,0.255];
y2=[0,0.0625,0.125,0.25,0.5];
y3=[0,0.0125,0.025,0.05,0.1];
y4=[0.01,0.01,0.01,0.01,0.01];
让matlab 同时显示这4条直线,并且给这4条直线命名,如：直线1.
我一点也不会用matlab，我把下面两位人的程序拷进matlab 7.0，程序出现以下错误： To get started, select MATLAB Help or Demos from the Help menu.
The element type "name" must be terminated by the matching end-tag "".
Could not parse the file: g:\matlab\toolbox\ccslink\ccslink\info.xml
ans =
123麻烦你们好人帮到底，把这个程序自己编出来以后在matlab 7.0 运行完以后 再告诉我 谢谢了
t=[0,2,4,6,8];
y1=[0,0.075,0.135,0.1875,0.255];
y2=[0,0.0625,0.125,0.25,0.5];
y3=[0,0.0125,0.025,0.05,0.1];
y4=[0.01,0.01,0.01,0.01,0.01];
让matlab 同时显示这4条直线,并且给这4条直线命名,如：直线1.
我一点也不会用matlab，我把下面两位人的程序拷进matlab 7.0，程序出现以下错误： To get started, select MATLAB Help or Demos from the Help menu.
The element type "name" must be terminated by the matching end-tag "".
Could not parse the file: g:\matlab\toolbox\ccslink\ccslink\info.xml
ans =
123麻烦你们好人帮到底，把这个程序自己编出来以后在matlab 7.0 运行完以后 再告诉我 谢谢了
t=[0,2,4,6,8];
y1=[0,0.075,0.135,0.1875,0.255];
y2=[0,0.0625,0.125,0.25,0.5];
y3=[0,0.0125,0.025,0.05,0.1];
y4=[0.01,0.01,0.01,0.01,0.01];
subplot(2,2,1),plot(t,y1),title('直线1');
subplot(2,2,2),plot(t,y2),title('直线2');
subplot(2,2,3),plot(t,y3),title('直线3');
subplot(2,2,4),plot(t,y4),title('直线4');
这样可以实现
程序没有问题啊,我是运行了才发上来的.你把你的错误完整的发上来吧
我用matlab2007运行过,没有问题.7.0我以前也用过,好像不能直接输入汉字,但是应该能识别啊?你这样改一下看看：
t=[0,2,4,6,8];
y1=[0,0.075,0.135,0.1875,0.255];
y2=[0,0.0625,0.125,0.25,0.5];
y3=[0,0.0125,0.025,0.05,0.1];
y4=[0.01,0.01,0.01,0.01,0.01];
subplot(2,2,1),plot(t,y1),title('line1');
subplot(2,2,2),plot(t,y2),title('line2');
subplot(2,2,3),plot(t,y3),title('line3');
subplot(2,2,4),plot(t,y4),title('line4');
再出不来,应该就是你的软件有问题了.
y1=[0,0.075,0.135,0.1875,0.255];
y2=[0,0.0625,0.125,0.25,0.5];
y3=[0,0.0125,0.025,0.05,0.1];
y4=[0.01,0.01,0.01,0.01,0.01];
subplot(2,2,1),plot(t,y1),title('直线1');
subplot(2,2,2),plot(t,y2),title('直线2');
subplot(2,2,3),plot(t,y3),title('直线3');
subplot(2,2,4),plot(t,y4),title('直线4');
这样可以实现
程序没有问题啊,我是运行了才发上来的.你把你的错误完整的发上来吧
我用matlab2007运行过,没有问题.7.0我以前也用过,好像不能直接输入汉字,但是应该能识别啊?你这样改一下看看：
t=[0,2,4,6,8];
y1=[0,0.075,0.135,0.1875,0.255];
y2=[0,0.0625,0.125,0.25,0.5];
y3=[0,0.0125,0.025,0.05,0.1];
y4=[0.01,0.01,0.01,0.01,0.01];
subplot(2,2,1),plot(t,y1),title('line1');
subplot(2,2,2),plot(t,y2),title('line2');
subplot(2,2,3),plot(t,y3),title('line3');
subplot(2,2,4),plot(t,y4),title('line4');
再出不来,应该就是你的软件有问题了.
高分急求 在线等 如何用matlab 画4条直线 并且给这4条直线命名.
如何用4条直线,一笔将这9个点连起来?
如何用CAD画直线长度和方位角(在线等)
如何用反证法证明两条直线是异面直线
如何用三角尺过已知直线外一点画这条直线的平行线
o o o o o o o o o 上面有九个点如何用4条直线连接 且要4条直线首尾相连
两条直线的位置关系（在线等）
如何用三条直线连九个点
高分求matlab怎么画三维图（在线等,急）
一直线过点M(-3,4),并且在两坐标轴上截距之和为12,这条直线方程是?
排成3行3列的矩阵形式的九个点.如何用一笔划出4条直线,经过这所有九个点.
【MATLAB】如何用最小二乘法拟合直线?