ansys和LS-DYNA关键字手册一样吗?我知道LS-DYNA前处理是ansys.

ansys和LS-DYNA关键字手册一样吗?我知道LS-DYNA前处理是ansys.
ansys和LS-DYNA关键字手册一样吗?

说完全不同也是不太正确的,ansys自己已经建立了对应的lsdyna如下：
ANSYS Command Corresponding LS-DYNA Command
EDADAPT *PART
EDALE *CONTROL_ALE
EDASMP *SET_PART_LIST
EDBOUND *BOUNDARY_SLIDING_PLANE *BOUNDARY_CYCLIC
EDBVIS *CONTROL_BULK_VISCOSITY
EDBX *DEFINE_BOX
EDCADAPT *CONTROL_ADAPTIVE
EDCGEN *CONTACT
EDCMORE *CONTACT
EDCNSTR *CONSTRAINED_EXTRA_NODES_SET
*CONSTRAINED_NODAL_RIGID_BODY
*CONSTRAINED_SHELL_TO_SOLID
*CONSTRAINED_RIVET

EDCONTACT *CONTROL_CONTACT
EDCPU *CONTROL_CPU
EDCRB *CONSTRAINED_RIGID_BODIES
EDCSC *CONTROL_SUBCYCLE
EDCTS *CONTROL_TIMESTEP
EDCURVE *DEFINE_CURVE
EDDAMP *DAMPING_PART_MASS *DAMPING_PART_STIFFNESS
EDDC *DELETE_CONTACT
EDDRELAX *CONTROL_DYNAMIC_RELAXATION
EDDUMP *DATABASE_BINARY_D3DUMP
EDENERGY *CONTROL_ENERGY
EDGCALE *CONTROL_ALE

EDHGLS *CONTROL_HOURGLASS
EDHIST *DATABASE_HISTORY_NODE *DATABASE_HISTORY
EDHTIME *DATABASE
*DATABASE_BINARY_D3THDT

EDINT *INTEGRATION_BEAM
*INTEGRATION_SHELL

EDIPART *PART_INERTIA
EDIS *STRESS_INITIALIZATION
*STRESS_INITIALIZATION_DISCRETE

EDLCS *DEFINE_COORDINATE_VECTOR
*DEFINE_COORDINATE_SYSTEM
*DEFINE_VECTOR

EDLOAD, , (FX, FY, FZ, MX, MY, MZ) *LOAD_NODE_SET
EDLOAD, , (UX, UY, UZ, ROTX, ROTY, ROTZ, VX, VY, VZ, AX, AY, AZ) *BOUNDARY_PRESCRIBED_MOTION_SET
EDLOAD, , (ACLX, ACLY, ACLZ, OMGX, OMGY, OMGZ) *LOAD_BODY_GENERALIZED
EDLOAD, ,TEMP *LOAD_THERMAL_VARIABLE
EDLOAD, , PRESS *LOAD_SEGMENT
*LOAD_SEGMENT_SET
*LOAD_SHELL_SET

EDLOAD, , (RBUX, RBUY, RBUZ, +RBRX, RBRY, RBRZ, RBVX, RBVY, RBVZ,RBOX, RBOY, RBOZ) *BOUNDARY_PRESCRIBED_MOTION_RIGID
EDLOAD, , (RBFX, RBFY, RBFZ, RBMX, RBMY, RBMZ) *LOAD_RIGID_BODY
EDMP,HGLS *HOURGLASS
EDNB *BOUNDARY_NON_REFLECTING
EDNROT *BOUNDARY_SPC_SET
EDOPT *DATABASE_FORMAT
EDOUT *DATABASE_OPTION
EDPART *PART
EDPVEL *SET_NODE
*INITIAL_VELOCITY
*INITIAL_VELOCITY_GENERATION
*CHANGE_VELOCITY
*CHANGE_VELOCITY_ZERO

EDRC *RIGID_DEFORMABLE_CONTROL
EDRD *DEFORMABLE_TO_RIGID
*RIGID_DEFORMABLE_D2R
*RIGID_DEFORMABLE_R2D

EDRI *DEFORMABLE_TO_RIGID_INERTIA
EDRST *DATABASE_BINARY_D3PLOT
EDSHELL *CONTROL_SHELL
EDSP *CHANGE_SMALL_PENETRATION
EDSTART r = d3dumpnn lsdyna command line option
EDTERM *TERMINATION_NODE
*TERMINATION_BODY

EDVEL *SET_NODE
*INITIAL_VELOCITY
*INITIAL_VELOCITY_GENERATION
*CHANGE_VELOCITY
*CHANGE_VELOCITY_ZERO

EDWELD *CONSTRAINED_SPOTWELD
*CONSTRAINED_GENERALIZED_WELD_SPOT

BFUNIF or TUNIF *LOAD_THERMAL_CONSTANT
LDREAD *LOAD_THERMAL_CONSTANT_NODE
REXPORT m = drelax lsdyna command line option