Error:Width mismatch in pin_name -- source is
来源:学生作业帮 编辑:作业帮 分类:综合作业 时间:2024/05/21 20:51:23
Error:Width mismatch in pin_name -- source is
Error:Width mismatch in pin_name12 -- source is ""zs_dqm_from_the_sdram_0[1..0]" (ID sd_sopc:inst)"
Error:Width mismatch in pin_name12 -- source is ""zs_dqm_from_the_sdram_0[1..0]" (ID sd_sopc:inst)"
我在用原理图进行NIOSII 硬件部分编程的时候也遇到了这样的问题,现在已经解决了.
官方的解释是:
This is due to a mismatch between the label on a bus and the pin that it is connecting to.For example,if a bus has the label A[8..0] (9-bits wide),and the pin has the label A[7..0] ( 8 bits wide),this error will be generated.This also happens if you use a single dimensional bus label where a multi-dimensional bus label is required,or vice-versa.
大意就是说你的IO口名称(就是原理图中你自己能修改的那个名字)和芯片内的IO口定义的数据宽度不等.经过检查发现NIOSII在原理图设计中使用自动IO生成功能(Generate Pins for symbol ports)时,若模块复杂则会错位,也就是说你的下一个IO口实际上搭到了上一个IO口上,这样不报错才怪.我的解决方法把模块和IO之间的连线全部删掉,然后再手动连起来.重新配置管脚后编译通过
官方的解释是:
This is due to a mismatch between the label on a bus and the pin that it is connecting to.For example,if a bus has the label A[8..0] (9-bits wide),and the pin has the label A[7..0] ( 8 bits wide),this error will be generated.This also happens if you use a single dimensional bus label where a multi-dimensional bus label is required,or vice-versa.
大意就是说你的IO口名称(就是原理图中你自己能修改的那个名字)和芯片内的IO口定义的数据宽度不等.经过检查发现NIOSII在原理图设计中使用自动IO生成功能(Generate Pins for symbol ports)时,若模块复杂则会错位,也就是说你的下一个IO口实际上搭到了上一个IO口上,这样不报错才怪.我的解决方法把模块和IO之间的连线全部删掉,然后再手动连起来.重新配置管脚后编译通过
Error:Width mismatch in pin_name -- source is
一个vhdl的语句,一直报错显示width mismatch in relational operator,
trial and error is the source of our knowledge是什么意思?
The source error翻译成中文
The perfume lily's love source in is free
Source is in the hierarchy of the destination.什么意思
英语翻译The gate width and delay step size is set in the next li
Three "This ravine,is three squares in width from one battle
msp430 msp430f149问题 Fatal Error[Pe005]:could not open source
in-depth and in-width reform是什么意思
ERROR 1802:Unauthorized network card is plugged in-power off
error 1802Unauthorized network card is plugged in.Power off