英语翻译1.Conveyorbelt2.CrownCap in shell lining machine ( Autom

英语翻译
1.Conveyorbelt
2.CrownCap in shell lining machine ( Automatic crown cap lining machine suitable forextruding granulated material (i.e.PVC,PE,EVA),silting the material in tosingle pellets,inserting the pellet in to crown cap and moulding the lineraccording to a well defined profile.The output of the machine strongly dependson the type of resin used,part design and part weight.)
– Machine mustcontains cap feeding hopper with sorting device,extruder with 45 mm screw,equipped with AC motor and controlled by inverter for feeding of compound.Temp and screw revs are managed bycontrol system.
- Meltedcompound by-pass valve for cleaning the extruder,for start ups and stops ofthe machine.
- Lowfrequency magnetic induction unit for cap heating equipped with cooling system.
- Independenttemperature control systems for moulding punches and accessories.
- Linerweight reduction system.
- Videoinspection system and single color camera.
- PLCautomation and control system
- PCoperator interface
- Electricalcabin and single user-interface display for machine and CVS.
- Pneumatic-drivenwaste rejection device for defective caps.
- Capcounter with flow deviator to boxes at the exit.
- Visionsystem for liner control.
- AirConditioning system inside electric cabin.
- Maximumproduction – 180,000 crown/hr
- CapType – Standard,Intermediate,short
-

1．输送带
2．瓶盖内衬机(自动瓶盖内衬机适用于挤压粒状材料(如PVC、PE、EVA),充填单颗粒材料 ,根据定义好的配置文件在金属瓶盖内插入颗粒和模塑衬垫,瓶盖内衬机的输出极大依赖于使用的树脂类型,局部设计和局部重量.)
　－机器必须包含瓶盖喂料斗与分拣设备,挤出机与45毫米的螺丝,配备交流电动机和逆变器来控制复合料喂料.由控制系统来管理温度和螺杆转速
　－融化的复合材料通过旁通阀清理挤出机,并由它控制开始和停止机器
　－装有冷却系统的低频磁感应瓶盖加热单元
　－用于挤出件和附件的独立的温度控制系统
　－内衬减重系统
　－视频检测系统和单色相机
　－PLC自动化和控制系统
　－电脑操作界面
　－电气室和单一用户界面显示机器,CVS
　－对作废瓶盖有风动式废件吹出装置
　－出口处有偏置的瓶盖计数装置
　－衬里控制视觉系统
　－电机内置空调系统
　－最大生产能力- 180000只/小时
　－帽型－标准,中间,短