关于 H3C 配置AC+瘦AP的、谁能帮我看看问题出在哪了吗、

关于 H3C 配置AC+瘦AP的、谁能帮我看看问题出在哪了吗、
这个是我AC的配置
disp cur
#
version 5.20, Release 3106P05
#
sysname AC
#
domain default enable system
#
telnet server enable
#
port-security enable
#
dot1x authentication-method eap
#
oap management-ip 192.168.0.101 slot 0
#
vlan 1
#
vlan 2
#
domain system
authentication ppp local
access-limit disable
state active
idle-cut disable
self-service-url disable
#
dhcp server ip-pool test
network 1.1.1.0 mask 255.255.255.0
gateway-list 1.1.1.250
#
user-group system
#
local-user admin
password simple admin
authorization-attribute level 3
service-type telnet
local-user user1
password simple 123
service-type ppp
#
wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
#
wlan radio-policy 1
#
wlan service-template 1 clear
ssid test_ap1
bind WLAN-ESS 1
service-template enable
#
interface NULL0
#
interface Vlan-interface1
ip address 1.1.1.250 255.255.255.0
#
interface GigabitEthernet1/0/1
port access vlan 2
#
interface WLAN-ESS1
#
wlan ap test_ap1 model WA2210-AG
serial-id 210235A29DB098000553
radio 1
channel auto
max-power 20
radio-policy 1
service-template 1
radio enable
#
dhcp enable
#
load xml-configuration
#
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
user privilege level 3
#
return

这个是观察结果,结果是状态一直是idle 我想知道问题出在了哪、
[AC]disp wlan ap all
Total Number of APs configured : 1
Total Number of configured APs connected : 0
Total Number of auto APs connected : 0
AP Profiles
-------------------------------------------------------------------------------
AP Name APID State Model Serial-ID
-------------------------------------------------------------------------------
test_ap1 1 Idle WA2210-AG 210235A29DB098000553
-------------------------------------------------------------------------------
[AC]
这个是我瘦AP的设置、
[WA2210-AG]disp cur
#
version 5.20, Release 1109P05
#
sysname WA2210-AG
#
info-center source LWPC channel 4
#
ipv6
#
telnet server enable
#
vlan 1
#
interface NULL0
#
interface Vlan-interface1
ip address dhcp-alloc
#
interface Ethernet1/0/1
#
interface WLAN-Radio1/0/1
#
user-interface con 0
user-interface vty 0 4
user privilege level 3
set authentication password simple h3capadmin
#
return

AC+瘦AP 中间加了一个交换机.交换机什么也没配置.
下午做的时候还能收到wifi的 晚上回来再做就不好使了.求教!
我想用DHCP分配给 AP和用户使用.

interface GigabitEthernet1/0/1
port access vlan 2
这个vlan 是2 但是你的dhcp的配置是vlan1 而ap需要在ac上注册,需要有个ip地址可以和ac通信,你这个接口是vlan2,ap是怎么也不会获取到ip地址的.
将这个接口的配置
undo port access vlan 删除掉,恢复到默认vlan1就可以了