作业帮checking file system on E:the type of the file system is NTF
来源：学生作业帮 编辑：作业帮 分类：综合作业 时间：2024/05/11 19:45:12
checking file system on E:the type of the file system is NTFS.
checking file system on E:
the type of the file system is NTFS.
one of your disks needs to be checked for consistency.you may cancel
the disk check,but it is strongly recommended that you continue
windows will now check the disk
volume serial number is 4a69-b7ad windows is verifying files and
folders ...
o percent completed
开机出现上面的后就不动了 要在o percent completed之前按esc退出才能进入桌面.
是什么原因的?以前都不是这样,出现也是从o percent 到100 percent 然后进入桌面.
checking file system on E:
the type of the file system is NTFS.
one of your disks needs to be checked for consistency.you may cancel
the disk check,but it is strongly recommended that you continue
windows will now check the disk
volume serial number is 4a69-b7ad windows is verifying files and
folders ...
o percent completed
开机出现上面的后就不动了 要在o percent completed之前按esc退出才能进入桌面.
是什么原因的?以前都不是这样,出现也是从o percent 到100 percent 然后进入桌面.
开机出现这种情况一般是非正常关机造成的,这是硬盘自检,属于正常现象,只不过比较耽误时间,如果你觉得烦是可以取消的.Windows在不正常关机的情况下(如:突然断电等),就会在下次启动电脑时进行磁盘扫描.可是往往等它完成扫描后,再一次启动电脑时它还是“阴魂不散”的继续扫描.我就遇到过这种情况,所以就总结了以下几条经验,希望能给大家一些参考.
如果checking files system后有one of your disks to be checked for consistency.you may cancel the disk check,but it is storngly recommended that you continue.这句英文,在自检时按键盘上的enter键即可取消,没有这句话就得等待到扫描结束.
我们在Windows界面下,通过“磁盘碎片整理”程序来完成.首先打开开始菜单,运行,输入CMD,回车,在窗口中键入“chkdsk x:/f”(x为盘符)进行扫描;然后启动“磁盘碎片整理”对相应的磁盘进行碎片整理,可以消除再次的磁盘扫描.
我们知道系统之所以要对磁盘进行扫描是因为在注册表中设置了“脏”字节.在注册表中找到以下分支:
“Hkey_local_machine\System\CurrentControlSet\Control\Session Manager”在注册表右侧的窗口中找到
“BootExecute:REG_MULTI_SZ”键值就是windows关于磁盘扫描的,双击“BootExecute:REG_MULTI_SZ”将其改为:
“autocheck autochk *”即可恢复成正常的状态.
用windows优化大师休复硬盘中的逻辑错误.再用360杀毒修复电脑.
删除被扫描的磁盘并重新建个盘.
打开我的电脑,点文件,文件夹选项,点查看,把隐藏文件扩展名的√单击去掉,点确定,再打开系统自带的记事本,输入以下内容：
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
"BootExecute"=hex(7):00,00
注意：保存时类型选择“所有文件”,再命名为 取消自检.reg （扩展名一定要是reg）
再打开取消自检.reg,再打开的窗口中点是（Y）,导入注册表,重启后即可见效.
删除所有磁盘,重新分区,再重装系统.
如果checking files system后有one of your disks to be checked for consistency.you may cancel the disk check,but it is storngly recommended that you continue.这句英文,在自检时按键盘上的enter键即可取消,没有这句话就得等待到扫描结束.
我们在Windows界面下,通过“磁盘碎片整理”程序来完成.首先打开开始菜单,运行,输入CMD,回车,在窗口中键入“chkdsk x:/f”(x为盘符)进行扫描;然后启动“磁盘碎片整理”对相应的磁盘进行碎片整理,可以消除再次的磁盘扫描.
我们知道系统之所以要对磁盘进行扫描是因为在注册表中设置了“脏”字节.在注册表中找到以下分支:
“Hkey_local_machine\System\CurrentControlSet\Control\Session Manager”在注册表右侧的窗口中找到
“BootExecute:REG_MULTI_SZ”键值就是windows关于磁盘扫描的,双击“BootExecute:REG_MULTI_SZ”将其改为:
“autocheck autochk *”即可恢复成正常的状态.
用windows优化大师休复硬盘中的逻辑错误.再用360杀毒修复电脑.
删除被扫描的磁盘并重新建个盘.
打开我的电脑,点文件,文件夹选项,点查看,把隐藏文件扩展名的√单击去掉,点确定,再打开系统自带的记事本,输入以下内容：
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
"BootExecute"=hex(7):00,00
注意：保存时类型选择“所有文件”,再命名为 取消自检.reg （扩展名一定要是reg）
再打开取消自检.reg,再打开的窗口中点是（Y）,导入注册表,重启后即可见效.
删除所有磁盘,重新分区,再重装系统.
checking file system on E:the type of the file system is NTF
checking file system on c:the type of the file system is ntf
checking file system on E:The type of the file system is FAT
英语翻译Checking file system on E:The type of the file system is
Checking file system on E; The type of the system is FAT32.
Checking file system on C:The type of the file system is FAT
Checking file system on H:The type of the file system is FAT
英语翻译Checking file system on I:The type of the file system is
Checking file system on I:The type of the file system is FAT
英语翻译Checking file system on H:The type of the file system is
英语翻译Checking file system on D:The type of the file system is
英语翻译Checking file system on G:The type of the file system is