英语翻译安全注意1.气动执行器应该在规定的气源压力范围内使用2.超过气源压力极限的操作使用将会损坏执行器3.超过温度极限
来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/05/16 10:20:45
英语翻译
安全注意
1.气动执行器应该在规定的气源压力范围内使用
2.超过气源压力极限的操作使用将会损坏执行器
3.超过温度极限的操作使用将会损害内部零件及弹簧复位出现故障
4.不适当的防腐蚀操作环境可能损害执行器内部和外面的零件
5.在线维修时必须切断气源,排空执行器内部的残余压力后方可维修
6.执行器带有压力时不要拆卸端盖和拆解执行器
7.执行器和阀门装配之前确定阀门开关位置和执行器及位置指示器的指示位置必须正确相同.
8.在转配调试操作时,使手及衣物远离阀门通口,主要操作人员安全.
安全注意
1.气动执行器应该在规定的气源压力范围内使用
2.超过气源压力极限的操作使用将会损坏执行器
3.超过温度极限的操作使用将会损害内部零件及弹簧复位出现故障
4.不适当的防腐蚀操作环境可能损害执行器内部和外面的零件
5.在线维修时必须切断气源,排空执行器内部的残余压力后方可维修
6.执行器带有压力时不要拆卸端盖和拆解执行器
7.执行器和阀门装配之前确定阀门开关位置和执行器及位置指示器的指示位置必须正确相同.
8.在转配调试操作时,使手及衣物远离阀门通口,主要操作人员安全.
Safe attention
1.The pneumatic carrying out device should use within the range of fixed source of the gas pressure .
2.Will damage the carrying out device in operation which exceeds the pressure limit of the source of the gas .
3.The operation which exceeds temperature limit will damage inside part and spring to reduce and break down .
4.The inappropriate operating environment of prevention of corrosion may damage the part inside and outside of the carrying out device .
5.Must cut off the source of the gas when the line is maintained , can be maintained after emptying the inside remnants pressure of the carrying out device .
6.Don't dismantle the end and cover and disassemble the carrying out device when the carrying out device has pressures .
7.The instruction positions of positioning valve switch and carrying out device and position indicator must be correct and the same before the carrying out device is assembled with the valve.
8.While rotating and is worthy of debugging operating, make the hand and clothes far away from the valve open mouth, operate the personal security mainly.
1.The pneumatic carrying out device should use within the range of fixed source of the gas pressure .
2.Will damage the carrying out device in operation which exceeds the pressure limit of the source of the gas .
3.The operation which exceeds temperature limit will damage inside part and spring to reduce and break down .
4.The inappropriate operating environment of prevention of corrosion may damage the part inside and outside of the carrying out device .
5.Must cut off the source of the gas when the line is maintained , can be maintained after emptying the inside remnants pressure of the carrying out device .
6.Don't dismantle the end and cover and disassemble the carrying out device when the carrying out device has pressures .
7.The instruction positions of positioning valve switch and carrying out device and position indicator must be correct and the same before the carrying out device is assembled with the valve.
8.While rotating and is worthy of debugging operating, make the hand and clothes far away from the valve open mouth, operate the personal security mainly.
气动薄膜调节阀里气动执行器的弹簧起点压力和压力根据什么来算
单作用气动执行器和双作用气动执行器在遇到危险时的不同体现
二氧化碳气瓶的安全使用常识
“泄漏浓度达到爆炸极限下限25%切断天然气气源”是在哪本规范里规定的
乙炔甁使用时,减压器的输出压力不的超过多少
使用弹簧测力计时要注意看清它的________,加在弹簧测力计上的力不许超过它的________,否则将会_______
如何计算一定压力下的气氨液化温度?
英语翻译各球阀厂家一般都采用自己长期合作的厂家供应的执行器,我公司使用的执行器是REMOTE.怎么读出来?
真空泵的极限压力是什么意思
使用液化气要遵循“火等气”的操作规则,不能“气等火”.( )
锅炉在用气压力比额定工作压力低很多的情况下,应该保持多少压力比较经济?
气液增压缸的压力问题我买的是20t气液增压缸压力显示115,使用的接头是4分接头12管,压力明显不够,如果改用4分接头1