英语翻译连杆是汽车发动机的主要传力构件之一,常处于高速运动状态,因此要求与其它零件间具有较高的配合精度.因而连杆的检测是

来源：学生作业帮编辑：作业帮分类：英语作业时间：2024/05/08 12:16:12

英语翻译
连杆是汽车发动机的主要传力构件之一,常处于高速运动状态,因此要求与其它零件间具有较高的配合精度.因而连杆的检测是生产中频繁而又不可缺少的环节.目前我国连杆检测对于平行度的检测主要采用手工检测.本选题的设计是专门用来检测连杆端面的平行度,它避免了手工检测可能带来的人为因素导致的误差,极大的提高了检测效率同时也提高了检测的精度.
求专业的翻译,翻成下面的话就算了.
Automobile engine connecting rod is one of the main power transmission components in the high-speed motion state,therefore,requirements and other components with high matching precision.Thus the connecting rod detection is a frequent and indispensable link in the production.At present our country link detection for parallelism detection mainly manual detection.This topic design is designed to detect the parallelism of the connecting rod,it avoids the manual detection possible man-made errors,greatly improve the detection efficiency but also improve the accuracy of the test.

As the automobile engine connecting rod is one of main transmission components and in high -speed motion state, it should be matched with other components accurately. The check and measurement for connecting rod is an indispensably and continually key work. At present, the check and measurement of the connecting rod parallel in our country is generally carried out with manual. The topic provides the effective measure to detect connecting rod end parallel, and which would avoid operation error caused by the manual so as to improve measurement efficiency and the measurement accuracy..

英语翻译柴油机连杆的加工工艺规程及工装设计摘要：连杆是汽车发动机主要的传动机构之一,它将曲轴与活塞连接起来,把作用于内燃机的连杆体是零件还是? 曲柄摇杆机构中具有急回运动性质的构件是（）.A.曲柄 B.连杆 C.摇杆 D.机架汽车发动机连杆选用什么型号的刚汽车发动机连杆问题我想请问一下,汽车发动机汽缸连杆弯了一般是由于什么原因引起的啊,18km/h/行驶时汽车打滑侧翻会引起连杆的作用连杆的作用是什么柴油机曲轴连杆轴颈开口销的作用是? 在机械配合中,对于精度要求高且需经常装拆的零件一般采用过盈配合,过渡配合,还是间隙配合? 求机械原理解答请告诉我构件与低副有哪些我自己的答案是构件：凸轮,2个滚轮,2个连杆,2个滑块低副：凸轮,2个滚轮旋转副, 汽车的排量越大,气缸是不是就越大?因此气缸的成本也就越高,相对带动的许多部件的要求也就越高?如：曲柄连杆、配齐机构、润滑曲柄连杆机构作用是不是将燃料燃烧是产生的热能转变为活塞往复运动的机械能,在通过连杆将活塞的往复运动