作业帮英语翻译(_灬尐静﹋﹌ 说(10:06):your lock is preset to open at 0-0-0 To
来源：学生作业帮 编辑：作业帮 分类：英语作业 时间：2024/05/28 07:24:20
英语翻译
(_灬尐静﹋﹌ 说(10:06):
your lock is preset to open at 0-0-0 To open:Turn the dials to 0-0-0 on the windows and pull up the shackle
(_灬尐静﹋﹌ 说(10:06):
To lock:Close the shackle and scramble the shackle and scramble the dials.
(_灬尐静﹋﹌ 说(10:09):
To reset to a new combination:1.open the lock 2.Turn the shackle 180 3.Depress the shackle and your lock is now ready to use of your new combination
(_灬尐静﹋﹌ 说(10:11):
The indicator can be activated by opening the lock with on overriding key .when the lock is opened by an ovrriding key ,the indicator in the form of a red "tongue"will pop out
(_灬尐静﹋﹌ 说(10:12):
onto the groove sruface on the front side of the lock casing.
(_灬尐静﹋﹌ 说(10:14):
To reset the indicator:1.insert the reset key into hole located of the top suface of the lock body befween the shackle legs as shown in Fig.1
(_灬尐静﹋﹌ 说(10:15):
2.Turn the key anti-clockwise until the indicator moves back to the lock body as shown in Fig.2.
(_灬尐静﹋﹌ 说(10:16):
Note:the overriding key must be withdrawn before resetting the indicator.
完了,就这些
(_灬尐静﹋﹌ 说(10:06):
your lock is preset to open at 0-0-0 To open:Turn the dials to 0-0-0 on the windows and pull up the shackle
(_灬尐静﹋﹌ 说(10:06):
To lock:Close the shackle and scramble the shackle and scramble the dials.
(_灬尐静﹋﹌ 说(10:09):
To reset to a new combination:1.open the lock 2.Turn the shackle 180 3.Depress the shackle and your lock is now ready to use of your new combination
(_灬尐静﹋﹌ 说(10:11):
The indicator can be activated by opening the lock with on overriding key .when the lock is opened by an ovrriding key ,the indicator in the form of a red "tongue"will pop out
(_灬尐静﹋﹌ 说(10:12):
onto the groove sruface on the front side of the lock casing.
(_灬尐静﹋﹌ 说(10:14):
To reset the indicator:1.insert the reset key into hole located of the top suface of the lock body befween the shackle legs as shown in Fig.1
(_灬尐静﹋﹌ 说(10:15):
2.Turn the key anti-clockwise until the indicator moves back to the lock body as shown in Fig.2.
(_灬尐静﹋﹌ 说(10:16):
Note:the overriding key must be withdrawn before resetting the indicator.
完了,就这些
（ _灬尐静﹋ ﹌说（ 10:06 ） ：
您的锁是预设开启在0-0-0开放：把转盘,以0-0-0在Windows和拉动了束缚
（ _灬尐静﹋ ﹌说（ 10:06 ） ：
锁定：关闭的束缚和混排的束缚和混排的转盘.
（ _灬尐静﹋ ﹌说（ 10时09分） ：
重置到一个新的组合：1.open锁定2.turn该束缚180 3.depress的束缚和您的锁是现在已经准备好使用您的新组合
（ _灬尐静﹋ ﹌说（ 10:11 ） ：
指标可以启动开放锁就压倒一切的关键,当锁打开一ovrriding的关键,在指标的形式,一个红色的“舌头” ,将弹出
（ _灬尐静﹋ ﹌说（ 10:12 ） ：
上槽sruface在前面一边的锁套管.
（ _灬尐静﹋ ﹌说（ 10:14 ） ：
重置指标：1.insert重置关键到孔位于的顶端表面的锁体befween该束缚腿显示,在图1
（ _灬尐静﹋ ﹌说（ 10:15 ） ：
2.turn的关键反顺时针方向行驶,直到指标搬回锁定机构,显示在图2 .
（ _灬尐静﹋ ﹌说（ 10:16 ） ：
注：压倒一切的关键,必须予以撤销,然后将其重置的指标.
您的锁是预设开启在0-0-0开放：把转盘,以0-0-0在Windows和拉动了束缚
（ _灬尐静﹋ ﹌说（ 10:06 ） ：
锁定：关闭的束缚和混排的束缚和混排的转盘.
（ _灬尐静﹋ ﹌说（ 10时09分） ：
重置到一个新的组合：1.open锁定2.turn该束缚180 3.depress的束缚和您的锁是现在已经准备好使用您的新组合
（ _灬尐静﹋ ﹌说（ 10:11 ） ：
指标可以启动开放锁就压倒一切的关键,当锁打开一ovrriding的关键,在指标的形式,一个红色的“舌头” ,将弹出
（ _灬尐静﹋ ﹌说（ 10:12 ） ：
上槽sruface在前面一边的锁套管.
（ _灬尐静﹋ ﹌说（ 10:14 ） ：
重置指标：1.insert重置关键到孔位于的顶端表面的锁体befween该束缚腿显示,在图1
（ _灬尐静﹋ ﹌说（ 10:15 ） ：
2.turn的关键反顺时针方向行驶,直到指标搬回锁定机构,显示在图2 .
（ _灬尐静﹋ ﹌说（ 10:16 ） ：
注：压倒一切的关键,必须予以撤销,然后将其重置的指标.
英语翻译your lock is preset to open at 0-0-0 To open:Turn the di
英语翻译The lock is preset at factory to open at 0-0-0.Check the
求英语高手翻译!1.The lock is preset at factory to open at 0-0-0.Che
英语翻译INSTRUCTIONS FOR USE·THE LOCK IS PRE SET TO 0-0-0·PUSH T
"The door is open.Could you have forgotten to lock the door?
The key to open the weathered with love heart lock.
英语翻译A locking B to lock C lock D locks
tom,it is careless of you to have left your key in the lock
英语翻译How to set your combination lock the cipher by default s
英语翻译To enable cheats without entering them,open your "option
OPEN YOUR ARMS TO CHANGE
open your arm to change