作业帮 > 英语 > 作业

英语翻译Attaching the fiber assembly to the holder 1Unscrew the

来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/05/17 18:30:26
英语翻译
Attaching the fiber assembly to the holder 1Unscrew the black cylinder-like depth gauge of the holder 2 Unscrew the threaded end-cap on the end of the holder 3 push the black plunger forward through the Z-slot on the base of the holder to expose the end of the plunger .Not internal threads inside of the plunger will accept the threaded fiber assembly 4 screw the fiber assembly into the end of the plunger 5 retract the plunger by pulling it back through the Z-slot and slide the threaded end-cap over the needle .screw the threaded end-cap tightly onto the end of holder 6 screw the black depth depth gauge onto the end of the holder over the threaded end-cap
将光纤组件与固定器组合
1,旋松固定器的黑色汽缸状深规;
2,旋松固定器底端的线状端盖;
3,将固定器基座的黑色活塞前推过Z型槽,打开活塞底部;活塞的内螺丝不可与线状光纤连接.
4,将光纤组件旋至活塞底部;
5,将活塞后拉,缩回Z型槽,将线状端盖滑过指针,将线状端盖与固定器底端通过螺丝紧固;
6,将黑色深规螺丝通过线状端盖固定至固定器底部.